805/927-0501   800/756-7043

Mon - Fri  8:00 a.m. - 5:00 p.m. Pacific

QSreadyQuick System Two

The Quick System Two is the evolution of our original portable sound system. The locking control cabinet on wheels contains all of the electronics, controls, patch panel, accessory drawer, and cable storage. The microphone and speaker stands have their own storage on the side of the cabinet. A speaker dolly completes the package.

Use the Quick System Two for any of your indoor or outdoor events. The standard system will typically cover up to 1000 people. System upgrades are available to accommodate even larger audiences.

Technical Summary


Frequency Response (+/-3 dB)

82 - 18 kHz

Frequency Response (-10 dB)

55 - 20 kHz

Coverage (Nominal -6 dB) Horizontal

90°

Coverage (Nominal -6 dB) Vertical

50°

Maximum SPL @ 1 meter

132 dB

Mic inputs

3 mV rms

Line Inputs

775 mV rms

RCA inputs

300 mV rms

Bass Channel EQ

+/- 10 dB @ 100 Hz

Treble Channel EQ

+/- 10 dB @ 10 kHz

Phantom Power

+27 VDC

Rated Power Amplifier Output, 1 kHz

2 x 700 watts @ 2 Ω
2 x 500 watts @ 4 Ω
2 x 275 watts @ 8 Ω

Signal to Noise Ratio

100 dB (A-weighted)

Total Harmonic Distortion

< 0.5%

Damping Factor (20 Hz - 1 kHz)

>500

Key Features


Portable Equipment Rack

13-ply birch lacquer finished, locking front and rear doors, 4 inch casters (2 with brakes), steel protective corners, zinc plated handles

Portable Loudspeakers (2)

250 watt continuous, 1000 watt peak power handling, 9-ply, 15 mm plywood construction, 18 gauge powder coated steel grill, 12 inch low frequency driver, 1.5 inch titanium diaphragm high frequency compression driver

Mic/Line Mixer

8 inputs, independent channel bass and treble controls, phantom power, master volume control

Power Amplifier

30.5 dB voltage gain, fan cooled, front gain controls, signal, clip and fault indicators, onboard digital signal processing, high and low pass filtering, peak limiter

Master Power Distributor

1 front unswitched outlet, 1800 watts, surge and spike protection, EMI and RFI filtering, on/off switch

Corded Handheld Microphone

dynamic cardioid with on/off switch, 50 ft. cable

Patch Cable for iDevice and Laptop Audio

easily connect iDevice and laptop audio for high quality playback

Accessory Drawer

steel construction with a keyed lock

Patch Panel

XLR balanced microphone inputs, RCA line inputs, XLR balanced line output, Speakon™ loudspeaker outputs

 

Popular Optional Features


Wireless Microphone System

Handheld cardioid dynamic, mute switch, low battery indicator, full diversity frequency agile receiver

CD Player

CD/CD-R/RW, MP3 and WAV files, USB port for iPod & memory device playback/charging, IR wireless remote

The Quick System Two

The system in action

Quick System Two open rack cabinet

The rolling Control Cabinet with storage for the electronics, cables and stands.

QS2PhotoAnchor

Quick System Two Speaker Dolly

The Speaker dolly ready for transport. Two of the casters have brakes for secure parking.

Quick System Stand Storage Pocket

Loaded and ready for transport.

Quick System Two transported

Rolling the system out.

The Quick System Two setup and ready to go

Setup and ready to go.

Quick System Two transported

The Portable Cabinets are fitted with Heavy-Duty 4 Inch Casters with Brakes.

The Quick System Two setup and ready to go

The Corded Handheld Dynamic Microphone includes a 50 foot cord.

Big Gig Speaker Transport

Step two.

Tilt the stand and loudspeaker up.

QS1speakerStorage1

Step one.

Fit the speaker stand into the loudspeaker.

Big Gig Speaker Transport

Cooling vents on rear of rack cabinet

QS1speakerStorage2

Step three.

Raise the speaker stand height if necessary.

© 1996 - 2016 Jontronics

JontronicsLogo